Error 230: Laminate 2 Jam

The upper laminate failed to peel properly.

Use the blue knob to feed the card out of the laminator and remove the laminate.

If this is impossible turn the lower left laminate roll by hand to peel the laminate off of the card.

Verify that the laminate is installed correctly.

Verify the laminator temperature settings are correct in the driver.

Right-Click on the printer and select printing preferences. Click the "Default" button on the lamination tab.

If the problem persists lower the dwell time on the lamination tab by .5 seconds.

Try another roll of laminate.

If the problem persists REPLACE LAMINATOR